Ridgid 1224 Power Threading Maching 1/2-4 NPT 120V 60Hz

Ridgid 1224 Power Threading Machine features:

Threads 1/4-2 pipe at 36 RPM and 2-1/2-4 at 12 RPM
The 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.
An induction motor helps insure sounds levels well within the limits set by the regulating authorities
A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced
1/4-2 Universal Die Head; 2-1/2-4 receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads
Constant and proper lubrication of dies and workpiece with through-head oiling
CSA Approved
Approved to UL Standards (NRTLC)

Specifications:

Pipe Capacity: 1/8 - 2 (3 mm - 50 mm)
Bolt Capacity: 1/4 - 2 (6 mm - 50 mm)
Motor: 1/2 HP, 115V Universal 25-60 Hz
Motor Control: Heavy-duty rotary FOR/OFF/REV with integral foot switch
Spindle Speed: 38 RPM (52 or 57 RPM available)
Chuck: Hammer-type with replaceable, rocker-action jaw insertsOiling System: Through-the-head, with integral oil reservoir. Self-priming, constant-flow, gerotor pump
Cutter: Model 360, roll-type cut-off, self-centering, full-floating
Reamer: Model 344, 1/8 - 2, five flute cone, right hand only

Includes:

26092

Write A Review

PlumbersCrib.com Plumbing Supplies Insinkerator Tankless Water Heaters Ridgid Mr. Steam Plumbing Supplies Sinks Toilet Seats