• 3"/5" Concentric Vent System with Intergrated Condensate Collector
• Connects to Metal Fab Inc., 3/5" Concentric Venting without an adapter
• Next Generation Burner Technology
• .26 GPM Minimum Flow Rate, .40 GPM Minimum Activation Flow Rate
• UMC-117 remote control and 10 ft of thermostat wire is included
• Ez-Link cable available for high demand applications to connect two tankless units to operate as one
• Manifold up to 6 units with an optional MIC-6 manifold control board
• All Rheem models can be linked in up to 20 unit manifold installations by using the optional MIC-180 and MICS-180 manifold control assembly
• High-altitude capability - up to 9,840 ft elevation above sea level (no chip required)
• Guardian OFW overheat film wrap
• All Rheem tankless models are third-party efficiency certified by GAMA
• Continuous hot water, energy saving and compact, space saving design
• Intelligent electronic controls designed to increase energy efficiency and safety
• Self Diagnostic System
• Digital display shows temperature setting and maintenance codes
• Built-in electric blower
• Supplied with a 120 volt power cord
• Environmentally friendly Low NOx burner meets SCAQMD rule 1146 requirements
• Freeze protection to -30 degrees F
• 11,000 - 180,000 BTU max
• Temp Range 85 - 140 degrees F
• 8.4 gal/min at 35 degree rise max.
• 6.7 gal/min at 45 degree rise max.
• 3.9 gal/min at 77 degree rise max.

*Flow rates vary depending on temperature of cold water supply.

Limited Warranty: 12-Year on heat exchanger, 5-Year on parts, 1-Year on labor. See Residential Warranty information Brochure for complete warranty information.

The 84 Series Tankless models can be converted for Commercial Installations.

See Commercial Warranty Brochure for details.