Ridgid 15722 300 Threader Complete 115V 25-60hz 57 RPM

RIDGID 15722 Model 300 Power Drive Complete, 57 RPM Pipe Threading Machine and 1/2-Inch to 3/4-Inch, 1-Inch to 2-Inch Universal Alloy Threading Die Heads, Oiler Included

Ridgid 15722 - 300 Complete 115V, 50/60 Hz (NPT) - 

• 57 Spindle Speed
• Pipe Threading Capicity - 1/8 - 1 1/4 inch
• Rod Threadding Capicity  1/4 - 1 1/2 Inch
• Max Geared Threader Capicity  6 inch
• Weight  212 Lbs

Ridgid 300 Features

• RIDGID speed chuck.
• Reversible 1/2 HP universal motor.
• Capacity: 1/8"-2" (3mm-50mm) pipe, 2 1/4"-4" with 141, and 4"-6" with 161 Geared Threaders; 1/4"-2" (6mm-50mm) rod.
• Recessed On/Off/Reverse switch.
• 115v, 38 RPM approved by CSA to CSA and UL standards.
• Convert a 300 Power Drive to a portable threading machine.
• iDEAL for use with RIDGID roll groovers, see page 5.1 

     Specifications

• Motor: 1/2 HP, universal, reversible motor, single-phase, 50/60 Hz, 115V (230V available).
• Switch: Heavy-duty FOR/OFF/REV and Integral Foot Switch.
• Chuck: RIDGID speed chuck with replaceable rocker-action jaws.
• Spindle Speed: 38 RPM (57 RPM available)
• rRear Centering Device: Cam-action turns with chuck.
• Support Bar: Heavy-duty (2).

Model 300 Complete

Standard Equipment

• 300 Power Drive only with footswitch.
• No. 811A universal, quick-opening die head.
• 1/2" - 3/4" Universal alloy die set.
• 1" - 2" Universal alloy die set.
• No. 360 Cutter: Capacity: 1/8"-2" (3mm-50mm) pipe, 1/4"-7/8" (6mm-2mm) rod with F-3 wheel, 5/16"-1" (8mm-25mm) with E-1032 cutter wheel.
• No. 341 Reamer: Positive-locking, 5-flute cone, right-hand 1/8"-2" (3mm-50mm). Special E863 RH/LH combination reamer cone available.
• No. 311 Carriage with lever.
• No. 1206 Stand.
• No. 1452 Clip-on tool tray.
• No. 418 Oiler with 1 gallon of premium thread cutting oil.
• No. 32 Transporter.

Automatic Oiler Accessories

Add a No. 304 retrofit kit to convert the 300 power drive to automatic oiling:

• Gear head assembly with oil pump.
• Oil pan assembly.
• Oil sprout.
• Support bar.
• Necessary connectors.
• One gallon of Nu-Clear thread cutting oil.